Reset Netgear Router Password [Steps to Execute the Process]

Forgetting the password of the Netgear router is one of the most exasperating things one can face. In case, you are also going through the same thing, then worry not because, in this blog, we have provided you with the guidelines to reset Netgear router password. Once done, we will also tell you how you can regain access to your router’s settings. Taking this into consideration, get down to reading this instant.

What is the Reality?

Truth be told, there are no specific instructions to reset Netgear router password. The only way you can get access to your old (default) password is by resetting or restoring your device to its default factory settings. This process will revert your device back to its default factory default values. In non-technical terms, your device will become as new as it was when you first purchased it. If you are ready to take this risk, by all means, keep reading.

How to Reset Netgear Router Password?

1. Locate the Reset Button

First of all, look for the Reset button on your Netgear router. For your information, the location of the button depends on the model that you are using. For example, on some models, the button is located at the back panel whereas on some, it is located at the bottom. In case, despite looking, you cannot find the button on your device, then it is recommended that you refer to the user manual of your networking device. What is that? You do not like reading? Well, worry not. The processes are also given in figures.

2. Press the Reset Button

As soon as you have located the Reset button on your router, press it within the hole. Avoid using a pen to do so as the device will not get restored properly. Instead, consider using an oil pin or a paper clip to press the button. The time for which you need to do this is 30 seconds to 5 minutes. As soon as your device resets, it will start rebooting. It is suggested that you do not avoid messing with the process by unplugging the device from its wall socket. Otherwise, the process will fail.

What to Do After Resetting the Device?

As mentioned earlier also, resetting the router will force it to go back to its default settings. This means that you will not just reset Netgear router password, but also every other setting. Thus, you need to now install your device from the beginning. There are three methods by which you can configure it. They have been outlined and explained here:

1. WPS Method

In this method, the basic requirement is for the Netgear wireless router as well as the existing modem to have the WPS button located on it.

2. Manual Method

The manual method demands a user to access the web user interface either via the web address, i.e. routerlogin.net, or the IP address, i.e. 192.168.1.1.

3. Nighthawk App

In case you are not that much of a computer person, then you can also use your mobile device to set up the Netgear wireless router.

As soon as you have set up the device, change the Netgear router password by accessing the Netgear Genie smart setup wizard.

How to Change Netgear WiFi Router Password?

• Switch on your computer and load an internet browser on it. Either access the default web or IP address. You will find yourself on the login portal.
• Here you are required to enter the user name and password, the default admin login credentials. Hit Log In. Soon the BASIC Home screen will come into view.
• Select Advanced > Administration > Set Password. Type the existing password first and then the new password. Hit Apply. In some time, your changes will get saved.

Wrap Up

In this manner, you will be able to reset Netgear router password, set up the router, and change the admin login password with ease. Yes, we agree that we did succeed in getting off track after providing you with the steps to reset the password, but it was needed. Otherwise, you would have gotten confused as to what should be done next. Had we not helped you out, you would have been stuck with issues.