– IP Login is the default gateway that helps you to log in to your router using a web browser. Type the IP address in the address bar of the browser and log in using the admin username and password.

Most Used Username Password Combinations for

Various routers use the IP address to log in. Some most common ones are Netgear, D-Link, Buffalo, ReadyNet, ZuniDigital, etc.

To log in to the router admin panel using the IP address, you need an admin username and a password. Here are some username and password combinations that are most commonly used:

Username: admin
Password: admin

Username: admin
Password :

Username: admin
Password: password

Username: root
Password: password

Username: 1234
Password: root

Username: –
Password: root

How to Log in to Router Using

Before logging in make sure that:

  • The router and modem are securely connected.
  • The computer or laptop that you are using to log in is connected to the router’s network.
  • You have the admin username and password handy.
  • The internet connection is stable.

Once done, use the steps given next to log in: Login Steps

  • Launch an internet browser.
  • In the URL bar, type
  • Press Enter.
  • A login window will open up.
  • Key in the admin credentials in the given fields.
  • Click Login/Log In/Ok.
  • You are logged in successfully.

Resolved: IP Login Issues

Although the login process is very easy, users get stuck. They may see an error and can not log in. There can be many reasons why you are facing login issues using the IP address. Some most common ones are:

  • Wrong IP address
  • Not connected to the right network
  • Unstable internet connection
  • Usage of outdated web browser
  • Accumulated cache
  • Faulty cables
  • VPN server, firewall, antivirus software on computer
  • Software glitches

How to Resolve Router Login Issues?

1. Reboot the Router

Minor software glitches can be responsible for major issues with technical devices. You can try fixing them by rebooting the router. Here is how you can reboot your router:

  • Disconnect the router and modem.
  • Power off the router.
  • Remove the power cable.
  • Wait for 5 minutes minimum.
  • Connect the router and modem again.
  • Supply electricity to the router.

Try logging in again.

2. Cross Check IP Address

You must use the correct IP address to log in to your router settings. Avoid using Verify that:

  • The IP address that you are typing in the URL bar of the internet browser has no typing mistakes.
  • You are entering the IP address in the URL bar only and not the search bar.

3. Examine Connections

All the connections must be firm and secure. Here is what you need to check:

  • The Ethernet cable connecting the router and modem is not damaged. Replace it if required.
  • The cable must be securely inserted in its place.
  • The ports should not be damaged.
  • Clean the ports using a cotton swab or soft brush once and then reconnect the devices.
  • The power cable should be able to supply consistent power supply to the router.

4. Connect to Right Network

Check whether the PC is connected to the correct network or not. It has to be connected to your router’s network for you to access its login page via Use these steps to connect to WiFi:

  • Make sure that the WiFi option is enabled on your computer.
  • Click the Windows button in the bottom left corner of your computer.
  • Type Settings.
  • Find Network and Internet and click it.
  • Select WiFi in the left panel.
    WiFi in the left panel
  • Turn on the WiFi option if it is disabled.
  • Select your router’s SSID and insert a password to connect to its WiFi.
PRO TIP: In case you can not use its WiFi network, then use an Ethernet cable (RJ-45) to connect your PC to the router.

5. Disable VPN/Antivirus/Firewall Software

Have you enabled any of the following software on your computer?

  • Firewall
  • VPN
  • Antivirus

If yes, then disable them temporarily and then try to log in. These may stop you from logging in.

6. Use Updated Internet Browser

Update the browser that you are putting to use to log in. The steps given below will assist you how to update your Google Chrome:

  • Open Google Chrome.
  • Click on three dots on the top-right corner of the browser.
  • Select Help > About Google Chrome.
  • Click Check for Updates.
  • The update will start automatically.
  • Relaunch Chrome once it is updated.

7. Clear Cache

The accumulated cache can prevent the login process. Consider clearing the cache and cookies from your browser if you still can not log in to your router.

8. Reset Router

Still stuck with the login issues? The final resort is to reset your router to the factory settings. This will erase all the current configuration settings from it. Use these instructions to reset your router:

  • Ensure that the router is powered up.
  • Press the Reset hole gently using a paper clip for a minimum of 10 seconds or press the Reset button.

Reset Router

Your router is now running on the default values.

Set it up once again from the very beginning using and you are all set to use its WiFi. You will no longer be facing any login issues now. Log in at any time and make changes to its setting as per your requirements.

Disclaimer: 192-168-1.co is an online information platform. All the information published on the website is for informational purposes only. We do not claim any sponsorship or endorsement of any third-party company.